T153 Multi-Core Architecture
Product Manualβ
ποΈ Introduction
This document is intended for development on the Luckfox Lume board using a heterogeneous multi-core system (AMP, Asymmetric Multi-Processing). It covers the complete workflow from setting up the development environment and compiling subsystem firmware to practical AMP application examples.
ποΈ Cortex-A7 Subsystem
1. Preparation
ποΈ RISC-V Subsystem
1. Preparation
ποΈ RISC-V Subsystem GPIO Test
This chapter describes how to use the RISC-V core to run a FreeRTOS or Baremetal system and control GPIO output. For details about how to compile, generate, and run FreeRTOS or Baremetal firmware, refer to the "RISC-V Subsystem Development and Usage" chapter.