Burning eMMC Images
Both the Luckfox Pico Ultra and Luckfox Pico Ultra W development boards come with built-in eMMC and are preloaded with a test system. However, after receiving the boards, users need to enable functions such as PWM, I2C, and UART through luckfox-config.
Equipment Preparation
- Windows 10（PC）
- Luckfox Pico Ultra and Luckfox Pico Ultra W development board
- USB Type-A to Type-C cable
- 100M/1000M Ethernet cable, and a router
- USB to Serial module
Driver Installation
- Download the RK Driver Assistant (click here to download).
- Open the RK Driver Assistant and install the USB driver. No need to connect anything during this process. Restart your computer after the installation is complete.
Image Download
Provides eMMC firmware for Luckfox Pico Ultra and Luckfox Pico Ultra.
| Version | Description | Download |
|---|---|---|
| Buildroot/Ubuntu | Firmware forLuckfox Pico Ultra/Ultra W | Google Cloud Link |
Flashing eMMC
- Download and extract the flashing tool (Click here to download).
- Open the software (right-click and run as administrator),Select RV1106.
- Steps to download firmware for Luckfox Pico Ultra and Luckfox Pico Ultra W on Windows:
a. Hold down the BOOT button, then connect to your computer. Release the BOOT button, and the Rockchip flashing tool will display the MaskRom device.
b. Load the firmware directory, reload the env file, and select all items.
c. Click the Download button.
Erasing eMMC
For Luckfox Pico Ultra, The erasing process is as follows:
a. Load firmware and select advanced functions.
b. Download the DownloadBin.
c. Click "Erase All".
For Luckfox Pico Ultra, there is no need to disconnect the USB connection when reprogramming the system. Simply press the RESET button to reset the board, and then press and hold the BOOT button while connecting it to the computer for flashing.
FAQ
USB Recognition Issue
Upon receiving the development board, it's common to encounter issues where SocToolKit fails to recognize the USB device. Below are some common troubleshooting methods:
- Ensure successful installation of Rockchip's DriverAssitant (recommended for Windows 10 or Windows 11).
- Disable antivirus software when downloading the flashing software:
- When downloading the flashing software, it's essential to disable antivirus software as it may inadvertently harm some configuration files, leading to SocToolKit being unable to correctly recognize the USB device.
- Use a high-quality Type-C cable:
- Choosing a high-quality Type-C data cable is crucial. Many users have reported that poor-quality cables can lead to loose connections, which can affect SocToolKit's ability to properly recognize USB devices. Ensuring the use of a high-quality Type-C cable can significantly improve connection reliability. It is important to note that many inferior cables only support charging and lack data transfer capabilities.
- Check if the device is occupied by a virtual machine or mobile assistant:
- Ensure that no other programs such as virtual machines, mobile assistants, etc., are occupying the USB device. These programs may prevent SocToolKit from accessing the USB device.
- USB HUB compatibility issues (rare):
- In some cases, USB HUB compatibility issues may cause SocToolKit to fail in recognizing the USB device. It is recommended to directly connect to the computer.
If after thorough investigation none of the above solutions resolve the USB recognition issue, please contact customer support for further assistance.